SMA sunny home manager - Editing Data Releases

5. To display the average expected yield and the monthly distribution in the diagrams on the
pages Annual Comparison and Energy and Power, activate the checkbox Display the
monthly distribution in the yearly comparison, as well as energy and power.
6. To enable configuration of the average expected yield on the pages Annual Comparison
and Energy and Power, activate the checkbox The monthly distribution can be
configured in the diagrams.
7. Select [Save].
Manually Entering the Monthly Distribution
1. Select Configuration > PV system properties in the page and menu selection.
2. Select the tab Parameters.
3. Select [Edit].
☑ The menu for parameter settings opens.
4. In the area Yield Expectations, enter the values in the text fields in % in the table with the
months.
5. To display the predicted annual yield and the monthly distribution in the diagrams on the
pages Annual Comparison and Energy and Power, activate the checkbox Display the
monthly distribution in the yearly comparison, as well as energy and power.
6. To enable configuration of the predicted annual yield on the pages Annual Comparison
and Energy and Power, activate the checkbox The monthly distribution can be
configured in the diagrams.
7. Select [Save].
12.15 Editing Data Releases
You can set whether to make your PV system data available to the PV database
"www.sonnenertrag.eu" or the Internet portal SunnyPlaces.
"sonnenertrag.eu" is an online platform where you can publish the yields of your PV system and
compare them with other registered PV systems.
SunnyPlaces is an Internet portal for private PV system owners where you can publicly present your
PV system in addition to SunnyPortal, compare your PV system with other registered PV systems,
and exchange experiences with other PV system owners. SunnyPlaces is free of charge.
Procedure:
1. Select Configuration > PV system properties in the page and menu selection.
2. Select the tab Data releases.
3. Select [Edit].
☑ The menu for setting data releases opens.
4. Activate or deactivate the data releases checkbox.
5. Select [Save].
12 System Settings
SMA Solar Technology AG
User Manual 119HoMan_Portal-BA-en-20