Tab Content
Day
• With selected view Stacking order view ( ):
The lines below in the diagram show the progression of the
power drawn by each load on the selected day. Using the
legend below the diagram, you can show and hide the loads
displayed in the diagram and change the stacking order of the
loads in the diagram (see Section7.3, page64).
• With selected view Time period ( ):
The light-colored bars show the time periods which you have
configured for the operation of the load.
The dark-colored bars show the time periods in which the loads
were actually in operation.
– The symbols ▸ and ■ show the start and the stop point of
operation.
– If you move the mouse pointer over one of the dark-
colored bars, the energy consumed by the load in this
time period is displayed in kWh.
• In the table:
Daily consumption: Energy drawn by the load on the
selected day
Configuration: With the Configuration button [ ] you can
configure the properties of the load.
6 Page and Menu Selection
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-2048
To Next Page
Loading...
