SMA sunny home manager - Device Settings and Configuration; Filtering Device Overview; Accessing Device Properties

8 Device Settings
8.1 Filtering the Device Overview
You can find individual devices more easily if you filter the device overview.
Requirement:
☐ You must be a Standard user, Installer or PV system administrator (see Section13.1,
page120).
Procedure:
1. Select Configuration > Device overview in the page and menu selection.
2. Set one or more of the following filters:
Text field or drop-down list Explanation
Device name Complete name of the device or parts of the device
name
Serial number Complete device serial number or parts of the serial
number
Product group
Device class sought, e.g. PV inverter,
SunnyHomeManager.
Data collection
• All: searches for activated and deactivated
devices
• Activated: only searches for activated devices
• Deactivated: only searches for deactivated
devices
3. Select [Refresh]. Tip: you can sort the devices in the device overview in ascending or
descending order by clicking the blue entry in the table header (Device Name, Serial
Number, Product Group, Data Collection).
4. To clear the filter, select [Reset].
8.2 Calling Up the Properties of a Device
The tab with the device properties displays information on each device. Depending on the device
and the device settings, various device properties can be displayed on this tab.
Requirement:
☐ You must be a Standard user, Installer or PV system administrator (see Section13.1,
page120).
Procedure:
1. Select Configuration > Device overview in the page and menu selection.
2. In the row for the device and the Properties column, select .
8 Device Settings
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-2066