SMA sunny home manager - Managing Automatic Software Updates

3. In the area Data request interval , select the desired option:
Option Description
Automatic
The SunnyHomeManager updates data on the pages Current
Status and Forecast and on the tabs Current within a few
seconds. The SunnyHomeManager sends data that is dis-
played on other pages to SunnyPortal within a few minutes (up
to a maximum of 15 minutes). If loads are controlled via radio-
controlled sockets, you must activate the Automatic option.
Hourly The SunnyHomeManager sends data to and requests data
from SunnyPortal hourly.
Settings made via SunnyPortal are sent to the
SunnyHomeManager within 60minutes.
Daily The SunnyHomeManager sends data to and requests data
from SunnyPortal every 24 hours.
Settings made on SunnyPortal are sent to the SunnyHomeMan-
ager within 24hours.
4. Select [Save].
8.8 Activating/Deactivating Automatic Software Updates
If the automatic software update is activated, SunnyPortal regularly checks whether there are
update files for the SunnyHomeManager or for the PV system devices. If there are update files,
these are automatically downloaded and the devices are updated.
You can activate/deactivate the automatic software update for:
• SunnyHomeManager
• PV system devices
By default, the automatic software update is activated for the SunnyHomeManager and the
devices in the PV system.
Requirement:
☐ You must have the user role Installer or PV System Administrator (see Section13.1,
page120).
Activating/Deactivating the Automatic Software Update for the
SunnyHomeManager
1. Call up the device properties of the SunnyHomeManager (see Section8.2, page66).
2. Select [Edit].
☑ The menu for setting the device properties opens.
3. To activate the automatic software update, activate the checkbox SunnyHomeManager in
the area Automatically update software.
8 Device Settings
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-2070