SMA sunny home manager - Setting Socket Operating Modes

Procedure:
• Enter the desired device name in the text field Device name, for example, radio-controlled
socket washing machine basement.
9.2.6 Setting the Operating Mode of the Radio-Controlled
Socket
9.2.6.1 Setting the Operating Mode of the SMARadio-Controlled
Socket
You have the following options for setting the operating mode of the SMAradio-controlled socket:
• Setting the operating mode via SunnyPortal
or
• Setting the operating mode via the SunnyPortal mobile app
or
• Setting the operating mode using the touch key on the SMAradio-controlled socket (see the
SunnyHomeManager installation manual)
Setting the Operating Mode via SunnyPortal
Requirements:
☐ The SMAradio-controlled socket must be assigned to the connected load (see Section9.2.4,
page76).
☐ A BLUETOOTH connection to the SunnyHomeManager must be available. The
BLUETOOTH connection is indicated by the blue glowing, lower horizontal LED of the
SMAradio-controlled socket.
☐ In SunnyPortal, the data request interval must be set to Automatic (see Section8.7,
page69).
☐ You must be a Standard user, Installer or PV system administrator (see Section13.1,
page120).
Procedure:
1. Select Load Balance and Control in the page and menu selection.
2. Select the Current tab.
9 Load Control
SMA Solar Technology AG
User Manual 77HoMan_Portal-BA-en-20