SMA sunny home manager - Changing the Color Selection for Loads; Selecting the Load Icon; Selecting the Load Type

Procedure:
1. Select Configuration > Load Overview and Planning in the page and menu selection.
2. Select in the line of the load under the column Configuration.
☑ The menu for setting the load properties opens.
9.3.2 Changing the Color Selection for Loads
The loads are displayed in different colors in the diagrams for better visualization. The individually
assigned color can be changed if necessary.
Procedure:
1. In the load list below the diagram, select the color field for the desired load.
or
Call up the load properties (see Section9.3.1, page79), select [Edit] and then select the
drop-down list Load color.
☑ A window for color selection opens.
2. Select the preferred color.
3. Select [OK].
9.3.3 Selecting the Load Icon
1. Call up the load properties (see Section9.3.1, page79).
2. Select [Edit].
3. Select the desired load icon in the Load icon drop-down list to use a standard load icon.
4. To use your own load icon, perform the following steps:
• Select [Upload load icon].
☑ A file selection window opens.
• Select the desired file (permitted file formats: JPG, JPEG, PNG, GIF, BMP).
• Select [Open].
☑ The file is uploaded and then displayed in the drop-down list Load icon as the selected
new load icon.
5. Select [Save].
9.3.4 Selecting the Load Type
The settings that are possible for the load depend on which load type you select.
9 Load Control
SMA Solar Technology AG
User ManualHoMan_Portal-BA-en-2080