SMA America, LLC Switching On and Off
Technical Description SI5048U-TUS121440 73
☑ The Sunny Island skips the QCG and the
notification shown here is displayed.
4. Press <Enter> and keep pressed.
☑ Process bars is shown in the display.
☑ On a slave, the notification displayed here is
shown until the master is started.
5. Press <Enter> on the master.
☑ A peep is heard. The Sunny Island is in operation and the green LED is on.
9.2 Stopping (Standby)
Proceed as follows to stop the Sunny Island:
1. Press <Enter> or <ESC> to stop the Sunny Island.
☑ The notification shown here is displayed.
2. Press and hold <Enter>.
☑ The remaining time is displayed as a bar.
☑ The Sunny Island is stopped. The notification shown
here is displayed.
Standby
Even in standby mode the Sunny Island still requires approx. 4 W of power from the
battery.
To Next Page
Loading...
