5 Mounting
SMA Solar Technology AG
Operating manual STP8-10-3AV-40-BE-en-12 25
Dimensions for mounting:
UP
90
120
150
30
170
327
497
121
9 x 18
Ø 9
9 x 18
336
460
9 x 18
93
168 168
230
230
107.5
126.5
Figure 6: Position of the anchoring points(Dimensions in mm)
Recommended clearances:
If you maintain the recommended clearances, adequate heat dissipation will be ensured. Thus, you
will prevent power reduction due to excessive temperature.
☐ Maintain the recommended clearances to walls as well as to other inverters or objects.
☐ If multiple products are mounted in areas with high ambient temperatures, increase the
clearances between the products and ensure sufficient fresh-air supply.
To Next Page
Loading...
