SmallRig Professional Edition 3168 - Device Operation and Power Management; Battery Charging and Output Functions

follow focus, etc.) via the USB-C port, DC5521 port (7.4V) or
DC5525 port (12V) on the Battery Adapter Plate 3168.
5. Turn on your Battery Adapter Plate 3168, activate the power
supply function to shot
When you connect all the devices and power supply cable, please
press and hold the switch of the Battery Adapter Plate 3168 for
3s. When the battery indicator is on and each port has current
output, you can start your shooting.
Caution
1) If you do not press and hold the switch to enable the power
supply function of the Battery Adapter Plate, there will be no
current output. At this point, it is in a non-working state.
2) The power supply function of the Battery Adapter Plate needs
to be enabled again after each battery change.
6. Power off to save battery power
When you finish shooting, please press and hold the switch of
the Battery Adapter Plate 3168 for 3s to disable its power supply
function. At this point, it will stop the current output to save the
power of your battery.
7. Make full use of the charging function of the Battery Adapter
Plate 3168
The Battery Adapter Plate 3168 also has the following
functions：
1) Charge the NP-F battery via external adapter or mobile power