7 8
5. Battery installation and uninstallation
Pull up the strap on the battery to take the battery out easily. Otherwise, put the
battery into the slot. Done!
Press the riser of the handle to adjust the stem height and position then let go of it.
Press the telescopic selection tiller to adjust the stem to the suitable angle then
let go of it.
3. Adjust the screw
height to change
the tilt angle of the
armrest.
4. Turn the screw to the
suitable height with
the hex key in the
toolkit.
5. Put the armrest
back. Done!
6. To adjust the armrest
vertically up and
down to the desired
position.
9. Armrest adjustment
6. Power charging
8. Handlebar tilt adjustment
7. Handlebar height adjustment
1. Turn the charger cover counter
clockwise open.
1. The default angle is
horizontal.
2. Plug the power cable to charge the
scooter.
2. Raise up the armrest.
To Next Page
Loading...