Smart Choice Pet Products Litter Spinner User Manual

I am confident the Litter Spinner will simplify your
I am confident the Litter Spinner will simplify your I am confident the Litter Spinner will simplify your
I am confident the Litter Spinner will simplify your
life. Thank you for your purchase. Enjoy!
life. Thank you for your purchase. Enjoy!life. Thank you for your purchase. Enjoy!
life. Thank you for your purchase. Enjoy!
For Customer Service or Returns,
please call (888) 236-2161
www.lierspinner.com
Perfect for Cats up to 20 lbs.
MADE IN THE USA
Another fine product from Smart Choice Pet Products, Inc.
TM
TM
TM
TM
Tips:
To help your cat get acclimated to the Lier Spinner,
transfer some lier from the old cat box into the Lier
Spinner.
For best results, it is important to maintain the lier level.
Use the “LITTER LEVEL LINE” inside the unit as a gauge.
Adding small amounts oen is best.
Aer spinning, tap the Drawer a couple of mes with your
palm before removing it. This will help knock off any
loose lier.
Use a small mat in front of the Lier Spinner to catch
stray lier and help clean your pet’s paws.
Any clumps aached to the inside of the drum can easily
be knocked loose with the provided Clump Sck before
spinning the drum. See photo on other side.
For thorough cleaning, remove the Drawer and the black
Plug in the back, pour out all the lier through the hole,
and wash. Dry thoroughly. Replace the Plug and Drawer,
then refill with fresh lier.
By rotang the Drum a bit more than one full turn, then
back to the starng posion, your cat’s lier will be level
for the next use.
For kiens, cats with arthris, or cats who prefer to have
their front paws outside the lier box, place a few books
in front to create a step into the Lier Spinner.
Congratulations on your purchase!
Randy Sharp
Lier Spinner Inventor
Assembly and Use
Instructions

Smart Choice Pet Products Litter Spinner Specifications

General

Brand	Smart Choice Pet Products
Model	Litter Spinner
Category	Pet Care Product
Language	English

Summary

How to Assemble Litter Spinner

Base Assembly

Align and snap together the two halves of the base unit for the Litter Spinner.

Drum Slide Guide Installation

Insert the slide guide into the back half of the drum, ensuring it is fully pushed in.

Drum Halves Assembly

Align the drum halves using the arrows and secure them with screws using a Phillips screwdriver.

Drawer and Drain Plug Setup

Insert the drawer and ensure the drain plug is securely fitted on the back of the drum.

Litter Filling and Drum Placement

Fill the drum with 2-3/4 inches of clumping litter and place it onto the base.

How to Use Litter Spinner

Cleaning the Litter Spinner

Spin the drum slightly more than one full rotation using a hand-over-hand motion to clean the litter.

Leveling the Litter

Rotate the drum backward to the starting position to level the litter for the next use.

Waste Removal

Remove the drawer, discard waste, and replace the drawer.

Litter Level Maintenance

Regularly check the 'Litter Level Line' and add small amounts of litter to maintain the proper level.

Tips for Reduced Stray Litter

Tap the drawer handle before removing to reduce stray litter. Use a clump stick for interior clumps.