Need help?Do you have a question about the smart home ADC-V522IR and is the answer not in the manual?
Instructions for connecting the camera via Ethernet cable to the network and Alarm.com account.
Steps to connect the camera to the network using Access Point mode via a web browser.
Guide for setting up the camera using Wi-Fi Protected Setup (WPS) for wireless connection.
Details on initiating WPS mode for camera connection.
Instructions for initiating AP mode for camera connection.
Procedure to restore camera settings to factory defaults.
General| Wireless | Yes |
|---|---|
| IR Range | 8 - 14 μm |
| Operating Temperature | -10°C to 50°C |
| Power Supply | 12V DC |
| Operating Humidity | 20% - 80% non-condensing RH |
| Humidity | 20% - 80% non-condensing RH |
To Next Page