Smart KaKoon J-LINK - Attaching Straps to J-LINKs; Securing Straps to Exterior; Tightening Straps; Securing Loose Material

7. Insert your strap hooks to exterior
J-LINK and secure it to trailer.
9. Use additional J-Links to secure
loose material following Tarp/Blanket
Securement Instructions.
10. Use additional holes for optional
connections, accessories or security.
Example, cable lock (sold separately).
8. Draw down and tighten both straps.
IMPORTANT! Always check all points to ensure they are secure.
Make sure your straps are pulled tightly and have no slack. Four
(4) point tie-down is recommended for safety when transporting a
load on the roads.
IMPORTANT:
A. J-Links are NOT designed to pull
sideways.
B. Keep the 800 Lbs. Maximum load
balanced and centered.
C. When using only 1-hook, the center
hole must be used.
6. Attach hook from strap to internal
J-LINK. When using one connector,
always use the center hole!
Check out Smart KaKoon’s other fabulous products.
Go to www.SmartKaKoon.com.
Thank you for your purchase!