Practical advice
Control console
Problem Possible causes/consequences and M Solutions
The display shows a
fault code.
A malfunction has occurred in the drive system.
X
Make a note of the fault code.
A qualified specialist workshop can use the fault code to
find the malfunction more quickly.
X
Have the malfunction rectified at a qualified specialist
workshop.
Drive system/electric motor
Problem Possible causes/consequences and M Solutions
The propulsion power
decreases although
the battery is still
providing enough
electrical energy.
Under heavy loads, the electric motor restricts its power out-
put. This protects it from overheating, for example on long and
steep inclines.
X
Reduce the drive level or stop briefly to allow the electric
motor to cool down.
X
If the pedal-assist technology fails frequently, have the
system checked at a qualified specialist workshop.
Technical data
Ratios
Primary ratio (standard
equipment)
50/22: i = 2.27
Primary ratio*
50/20: i = 2.5
Primary ratio*
50/24: i = 2.08
Gearbox gearing range 186 %
Battery type and technical data
Type Li-ion 01-4271
Battery voltage 48 V DC
Charging voltage 26 V DC
Charge current 3.45 A
Battery charger type and technical data
Type SA190B-24U
Input voltage 100 - 240 V AC
Output voltage 26 V DC
Power output 3.45 A
Tightening torques
Handlebars Tightening
torque
Clamp, front end to fork
stem (replaces the tor-
que specified in the
original Owner's
Manual)
10 Nm
22
Supplement to Original Owner's Manual
>> English.
* optional
To Next Page
Loading...
