Button introduction
Power ON/OFF：
1. Power ON/OFF: Press and hold the power button for more than 3 seconds, the power
on/off interface appears, and you can select on/off or restart.
2. Standby: Short press the power button to wake up or standby.
Volume button + -: Tap the volume +-- button to adjust the volume.
Return button O: Tap the O virtual button on the main unit to directly jump to the main
interface of the screen. And you can slide the screen left and right.
Voice left button②③：Enter the speech translation interface as shown 1，The left button
corresponds to the upper red language, and the right button corresponds to the blue
language below.
Example: Enter the voice translation interface as shown 1, long press the voice right
button②Speak Chinese "我爱你" After releasing, automatically dial the English and
display it as shown 2
Speak English and press the left button③，To change the language of the translation,
please click on the touch screen switch.
圖 1 圖 2
Preparation for work before use:
1. Device charging: Before using this device, please check if the device is fully charged.
If the device fails to turn on or the battery is low, please use the dedicated power cord
To Next Page
Loading...