16 17
9
Operation
(Instructions to operate each function)
Nozzle position adjustment
Warm air dryer adjustment
• When using the wash functions use (front), (back) buttons to adjust the nozzle to t to your body.
• LED level
Oscillate
• While using Posterior, Feminine or Turbo; press the same button again to oscillate nozzle.
The nozzle will automatically move back and forth covering a wider area for washing.
• Press button again to stop oscillation.
Power ON/OFF
• When the power is OFF, all of the LED lights will also be turned off and the unit will be turned OFF.
• If push the Power button for 3 seconds, the power will turn OFF after a beep sound.
• To turn the Power back ON, please push the Power button.
• The ( ) display lamp for the Water pressure / Dryer will change when using the dryer function.
• Adjust the dryer temperature by pressing (Strong), (Weak).
• The drying functions can be adjusted up to 5 levels.
• LED level
Front
I
Back
Strong
I
Weak
Strong
I
Weak
Front
I
Back
Energy saver
Automatic self cleaning nozzle
Cleaning the nozzle
• When pressing the energy saver light on the electronic toilet seat will turn on.
• Energy saver mode automatically maintains a water and seat temperature of 89.6.
• If you want to turn o the energy saver function,
press the button again and the display light will turn o.
• While the energy saving mode is on, if you increase or decrease the water and seat temperature, the Energy Saving
mode will automatically turn o. If you stand up from the bidet seat, the Energy Saving mode will automatically
turn back on.
• Before and after using For Posterior / Feminine / Turbo,
the nozzle will automatically clean itself.
• Please perform the actions below without sitting on the toilet seat
• On control panel press and hold the button for three(3) seconds and the nozzle will extend.
The nozzle will remain extended for two minutes.
• Twist the tip of the nozzle counter clockwise to separate the tip from the nozzle.
• To clean use a soft brush or a soft cloth
• Twist the tip clockwise back onto the nozzle when finished cleaning or when replacing with a new nozzle.
• If push button, nozzle will retracted back to its original position and will perform it's self-cleaning function.
In order to save energy, please abide by the following instructions:
• Keep seat cover closed when not in use to prevent heat from being lost.
• Keep temperature set to low.
• Unplug the power cord if you do not plan to use it for a long period of time.
Other energy saving tips
During a power outage, the water or seat heating temperature could appear to be lower than
the actual temperature setting.
Separation of the nozzle
Assembly of the nozzle
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
ON/OFF
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
ON/OFF
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
ON/OFF
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
ON/OFF
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
ON/OFF
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
WATER
PRESSURE
DRYER
WATER
SEAT
CHILD
ENERGY
SAVING
ON/OF
NOZZLE
POSITION
POSTERIOR
OSCILLATE
FEMININE
OSCILLATE
TURBO
OSCILLATE
DRYER
STOP
POWER
To Next Page
Loading...