9
4. Bluetooth and pairing
Depending on your Talk Pad setup, the speaker will either be
paired when you unpack your device, or you will need to pair
the speaker as part of the setup process.
To pair the speaker, make sure the speaker is off (press the
Connect button for 3 seconds).
Press and hold the Connect button for 10 seconds to power
on and start pairing mode.
The Bluetooth settings are found in the Settings app.
Select Settings, then Bluetooth to see a list of all connected
devices. The speaker is listed as Smartbox AAC - XXXX.
Press and hold the Connect Button for 3 seconds to power
the speaker off.
Tip: The code following Smartbox AAC matches the number
printed on the right side of the speaker, under the stand.
To Next Page
Loading...
