Need help?Do you have a question about the Smartec STC-IPM3542A/1 and is the answer not in the manual?
General| Image Sensor | 1/2.8" Progressive Scan CMOS |
|---|---|
| IR Range | Up to 30m |
| Power Supply | 12V DC, PoE (802.3af) |
| Ingress Protection | IP66 |
| Day/Night | IR Cut Filter with Auto Switch |
| Operating Temperature | -30 °C to +60 °C |
| Lens | 2.8-12mm Motorized Varifocal Lens |
| Video Compression | H.264 |
| Network Interface | 10/100 Mbps Ethernet |
| Frame Rate | 30fps @ 1920x1080 |
| Resolution | 1920x1080 |
Covers ceiling mounting, magnetic fields, wet areas, sun exposure, and cord protection.
Addresses hazards from attachments, object/liquid entry, and environmental limits.
Advises on cleaning, disassembly, abnormal conditions, and servicing.
Emphasizes keeping safety and operating instructions for future reference.
Lists primary hardware specifications and capabilities of the camera.
Details items included in the camera package.
Outlines PC hardware and software needed for browser-based live viewing.
Details image sensor, resolution, frame rate, compression, and illumination.
Covers menu options, day/night mode, shutter, WB, noise reduction, language.
Includes network interface, browser, protocols, connector types, power, and operating conditions.
Identifies and explains the function of various ports like Power, Audio, DI/DO, LAN, and Reset.
Step-by-step guide for connecting and setting up the IP camera.
Provides default IP address, username, and password for initial access.
Recommends IP address, subnet mask, and gateway for the PC/NB.
Describes how to access the camera interface via browser using IP address, username, and password.
Explains buttons and options like snapshot, record, zoom, and full screen.
Allows modification of IP stream types, codec profiles, resolution, frame rate, and bitrate.
Details frame rate, bitrate, rate control, local display, rotation, format, shutter speed, and quality.
Covers brightness, contrast, saturation, sharpness, deNoise, and EV compensation.
Configuration for OSD (On-Screen Display) and advanced image parameters like Auto IRIS and WDR.
Details settings for flicker control, white balance modes, and IR-cut.
Settings for enabling audio, input/output volume, sample rate, and bitrate.
Options for manual setting, synchronizing with PC, or SNTP server, and format/position.
Settings for DHCP, static IP, PPPoE, and network ports.
Configuration for SMTP, FTP, DDNS, and SNTP servers.
Configuration for motion, Ethernet loss, and DI/DO triggers.
Settings for upload via FTP/SMTP, local save, and play sound actions.
Settings for uploading files via FTP and saving to local storage.
Configuration for scheduling storage operations for every week.
Manages user accounts, passwords, and formats the SD card.
Procedures for updating the camera firmware and restarting the device.
Defines PTZ commands using Pelco D, Pelco P, or custom protocols.
Allows creation and definition of custom commands for OSD functions.
To Next Page