Need help?Do you have a question about the SMARTEL Tank-Check RF-412 and is the answer not in the manual?
General| Brand | SMARTEL |
|---|---|
| Model | Tank-Check RF-412 |
| Category | Tank Equipment |
| Language | English |
Tests the radio link and sensor operation by overriding the alarm delay.
Steps to activate the special program for testing radio link and sensor functionality.
Instructions for increasing sensor sensitivity for clean water applications.
Guide on how to drill a hole and attach the transmitter unit to the tank lid.
How to adjust the sensor's vertical position using the cable loop.
Instructions for installing the display unit indoors, away from metallic surfaces.
Details on connecting external alarms via the relay output.
Procedure for replacing the battery in the transmitter unit.
Presents technical specifications for the transmitter, sensor, and display units.
Description of the transmitter and display units and their basic functions.
Explanation of the high level alarm activation and its indicators.
Describes the alarm for loss of signal or low battery and troubleshooting.
How to reset alarms using the reset button and system behavior.
How the green LED indicates sensor connection status.
To Next Page