E UP
Install or Replace Batteries
Batteries must be installed for this product to operate.
1. Slide off the battery cover.
2. Insert 2xAAA batteries into the battery compartment.
Ensure that the battery polarities [ "+" and are
correct.
3. Close the battery compartment.
4. The monitor will automatically enter into normal
service mode
Toggle Fahrenheit or Celsius
To select Fahrenheit (OF ) or Celsius (oc), press "OC/OF
button located on the back of the monitor.
Placement for Maximum Accuracy
Because it is equipped with high performance sensor,
this device is sensitive to surrounding environment
conditions. Placement in a proper location is critical to
the accuracy and performance of this product. Place the
monitor in a dry area, free of dirt and dust. To ensure
accurate temperature measurement, place monitor out
of direct sunlight and away from any heat source or
vents. To ensure accurate humidity measurement, place
monitor away from humidity sources.
The monitor comes with built in magnets to attach to a
metal surface.
OPERATIO
Using the Humidity Monitor
The Humidity Level Indicator easily conveys a low, high or
ideal indoor humidity level for your home and health
High and Low Records
• High and low records are displayed for temperature and
humidity.
• 24hrs records are the maximum and minimum readings
recorded of the last 24 hours
• All-time records are the maximum and minimum
readings recorded since the batteries were installed
• Press the " UP " or " DOWN " button in normal mode to
enter the 24hrs or All-time mode of the maximum and
minimum values
• Hold " UP " button to manually clear the high records of
temperature and humidity currently being viewed. Dashes
display to confirm you have cleared
• Hold " DOWN " button to manually clear the low records
Note:
The backlight can't be set to be on permanently.
Calibration
The temperature and humidity readings can be calibrated
on the display to improve accuracy. Calibration can
improve accuracy when product placement or environ-
mental factors impact your data accuracy.
• To access calibration mode, hold " SET " button for 3
seconds. The display of the humidity flashes.
• Press " UP " or " DOWN " button to correct the display
of the humidity.
CALIBRATED appears on the display.
• Press " SET " button to confirm the setting
The temperature display flashes.
• Press " UP " or " DOWN " button to correct the display
of the temperature
CALIBRATED appears on the display.
• Press " SET " button to confirm the setting
Specifications
Temperature Range
Temperature Accuracy
Humidity Range
Humidity Accuracy
Power Supply
-4' Ft01580 F(-200 c to 700 C)
1% - 99% RH (relative humidity)
2x 1.5v AAA batteries
After-sales Support
If your device fails to work or your experience with this
product less than satisfactory in anyway, please do not
hesitate to contact us. Join our Instagram or Facebook
group for more support and discount information
• +1 (323)287-5798 : support@smartro co
Note:
of temperature and humidity currently being viewed
• 10 seconds of inactivity during setting, the display will
Dashes display to confirm you have cleared
save the adjustments and exit calibration mode.
Note: Records will be erased if the batteries are removed.
• Calibrations will be erased if the batteries are removed
• This product has passed professional testing and
Backlight
calibration. No extra calibration is required before using
Touch the or press any button to temporarily activate
the backlight.
• http://bit.ly/smartro 01
: smartro 01
Website: https://www smartro.co/
To Next Page
Loading...