Need help?Do you have a question about the SmartSight S1500e and is the answer not in the manual?
Details the physical attributes and components of the S1500e units.
Explains the security features, including SSL certificate implementation.
Describes the supported video resolutions and frame rates for the S1500e units.
Outlines essential principles for planning the network setup for optimal S1500e operation.
Details the steps required to configure the S1500e unit for operation.
Guides on setting essential unit parameters, including IP addresses.
Explains how to establish direct connections between S1500e transmitter and receiver units.
Provides instructions for the physical installation of the S1500e unit in its final location.
Describes how to configure the input/output features for alarms and audio.
Explains the procedure to reset the unit to its factory default settings.
Details how to connect to the CLI using the Telnet protocol.
Provides guidelines for navigating and interacting with the CLI menu structure.
Details options for securing the unit, including firmware updates and Telnet access.
Covers network settings like IP address, subnet mask, and gateway.
Guides on using the SConfigurator tool to access and configure the unit's CLI.
Details how to use HyperTerminal to access and configure the unit's CLI.
General| RAID Support | Hardware RAID controllers with support for RAID 0, 1, 5, 6, 10, 50, 60 |
|---|---|
| Network | optional 10Gb Ethernet |
| Power Supply | 800W |
| Form Factor | 2U rackmount |
| Management | Integrated BMC with IPMI 2.0 |
| Operating System Support | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise, VMware ESXi |
| Dimensions | 447 mm |
| Cooling | Redundant hot-swappable fans |
To Next Page