18
Press the “Scan” button.
M1
Next, scan the QR code on the bottom of your camera. You
can also choose to manually enter the code behind “UID”.
M2
under the QR code on your IP camera.
Next, enter the code: 000000 after “Security code”.
M3
After “Name” enter the name you want to assign to the camera.
Then press the “OK” button.
M4
Your camera has been added to your phone and will appear on the start screen of
your App.
N
On this you can see if the camera is connected (ONLINE)
N1
or if it is not
connected (OFFLINE).
For instructions on placing your camera go to section 4.6.
For instructions on using your camera with the App go to chapter 5.
4.3. Install your camera on your PC
Insert the included CD-ROM into your computer.
Launch "IPCamSetup.exe" from the CD-ROM.
Go through the installation by double clicking on "Next".
Complete the installation by clicking on "Restart computer".
desktop.
Please note! Do not remove this shortcut! You will have to re-install the IP camera tool
if you do.
4.4. Linking to your camera
Please note! To be able to use the IP camera's full functionality, you have to use
Internet Explorer 6 or higher (32 bit) and select ActiveX Mode. It is not possible to
create audio or video recordings in other web browsers.
Please note! If you opt for the ActiveX mode there is a possibility that you will not have
any picture yet. If this is the case, perform the following steps:
In Internet Explorer, go to: Tools-> Internet options-> Security settings ->Custom
level
D
Change the deactivated options to "Questions" under the ActiveX control elements
and insertion applications. If the "Questions" option is not available, tick "Activate".
See also:
E
F
G
Tip:
link from the open browser to a browser of your choice.
Start the IP Camera Tool via the "IP camera tool" shortcut on your desktop. The IP
camera tool automatically searches for the IP camera(s) connected to your network.
A window opens
A
. This window displays all your IP cameras. If no cameras are
connected, the window will remain empty.
Double click on the camera you want to use. In your standard web browser, an
For the user name, enter "admin" and click on "sign in". You do not need to enter a
password.
To Next Page
Loading...
