EasyManua.ls Logo

Smartwares RM218 - Installation and Operation; Installation Guide

Smartwares RM218
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-6-
NOTE: WEEKLY TESTING IS REQUIERED
DO NOT: Use an open flame to test your alarm, you could
damage the alarm or ignite combustible materials and start a fire.
CAUTION: Due to the loudness (85 decibels) of the alarm.
Always stand an arms-length always from the unit when testing.
Test the alarm weekly to ensure proper operation. Erratic or low
sound coming from your alarm may indicate a defective alarm.
1. What is the best place to mount a smoke alarm device
* In the middle of the ceiling but at least 50cm from every edge.
* At least one on each floor.
* In every bedroom.
* In the hallway and stairwell.
* On the landing.
* In the living room.
* In the storage room or rooms with electrical appliances.
2. The alarm should not be installed in:
* A space where the temperature can drop below 4
and above 40°C
* In humid areas.
* Right next to doors or windows and not near a fan or radiator.
Do not install smoke alarm device on the Wall !
INSTALATION

Related product manuals