UP
SETTING
(P)
SETTING
(P)
Acvate network
pairing mode
Press and hold the P1 button on the motor head for 6 seconds. The motor will
jog twice, pause briefly, and then jog once more, indicating that it is in pairing
mode and ready for app connection.
1. Remove the back cover of the remote.
2. Briefly press the P button until the motor jogs once.
3. Press the UP button until the motor jogs again.
4. Press the P button once more until the motor jogs once.
5. After a brief pause, a final jog of the motor indicates that it is in pairing mode
and ready for app connection.
0000
0000
Add HomeKit Device
· Pairing Method 1:
· Pairing Method 2:
3
Scan the QR code stick on the shade to add it.
Note: Ensure that the operations are performed on the correct channel corresponding to
the motor you wish to pair.
Compatible with the skylight cellular shade
Enter the pairing mode
To Next Page
Loading...