Smarty Pear Leo's Loo LLA-WH

Need help?

Do you have a question about the Smarty Pear Leo's Loo LLA-WH and is the answer not in the manual?

Summary

Control Panel Functions

Power Button

Long press to turn the machine on/off. Short press to clear the alarm.

Mode Button

Long press to switch modes. Short press to run/pause cycle in Manual mode.

Night Light Button

Press to turn the night light on or off.

Reset Button

Short press to reset Loo Count and Kitty Weight to zero.

Kitty Safety Features

Weight Sensors

Detect cat presence, pause machine if cat jumps on it while running.

Anti-Pinch Sensors

Stop and reverse rotation for obstructions, then resume cycle.

Electrical Safety

Features low operating voltage (12V) and an anti-chew electrical cable.

The Leo's Loo is an automatic self-cleaning litter machine designed to simplify cat litter maintenance. It operates on a "Plug & Play" principle, offering both automatic and manual modes for cleaning cycles.

Function Description:

The primary function of the Leo's Loo is to automatically clean cat litter. It features a rotating drum and a sifter that separates waste from clean litter, depositing the waste into a dedicated drawer. The machine includes weight sensors to detect the presence of a cat and safety sensors to ensure proper operation. It is designed to work exclusively with clumping clay litter.

Important Technical Specifications:

Dimensions: 26 x 25 x 26 inches (65 x 63 x 66 cm)
Input Voltage: 12 V
Max Weight Capacity: 55 lb (25 kg)
Max Litter Capacity: 1.5 gallons (6 L)
Material: PP (Polypropylene)
Product Weight - Net: 26.5 lb (12 kg)
Product Weight - Gross: 35.3 lb (16 kg)
Power - Operating: 53 kWh per year
Power - Standby: 9 kWh per year
Scale Accuracy: ± 1 lb (0.5 kg)
Included Accessories: Power adapter with an extra-long 6-foot anti-chew cord, Leo's Loo drawstring waste litter drawer liners, and liner clips.
Litter Type: ONLY clumping clay type litter.

Usage Features:

Power On/Off: Long press the POWER button for 3 seconds to turn the machine on or off.
Mode Selection: Long press the MODE button for 3 seconds to switch between Manual and Automatic modes.
Manual Cleaning Cycle: In Manual mode, a short press of the POWER button initiates one cleaning cycle. Another short press will pause the cycle.
Alarm Clearing: A short press of the POWER button clears any active alarms.
Night Light: Press the NIGHT LIGHT button to turn the night light on or off.
Reset: A short press of the RESET button zeros the Loo Count and Kitty Weight displays. This is also used to zero the Kitty Weight display after initial setup.
Litter Capacity: Recommended to use 1 gallon (4 L) of clumping clay litter, ensuring it does not exceed the MAX line in the litter bladder.
Placement: The machine must be placed on a solid, flat surface for the scale and safety sensors to function correctly.
Safety Features:
- Weight Sensors: Detect cats heavier than 2 lb (1 kg). The machine will pause if a cat jumps on it during a cycle. Not for use with cats weighing less than 2 lb (1 kg).
- Anti-Pinch Sensors: Stop the machine and rotate it backward as a safety measure if an obstruction is detected, then return to its normal cleaning cycle.
- Electrical Safety: Operates at a low voltage of 12 V and includes an anti-chew electrical cable.

Maintenance Features:

Waste Litter Drawer: The waste litter drawer is easily pulled out for emptying. It should be lined with a litter liner bag, secured by pushing clips down into their slots.
Emptying the Waste Drawer: When the waste drawer is full, an alarm will sound, the "!" indicator will light up, and the machine will stop rotating. To empty, short press the POWER button to stop the alarm, pull out the drawer, remove and replace the litter liner, and push the drawer back in.
Litter Refill: After emptying the waste drawer, top off the litter bladder to the MAX line.
Display Reset: After emptying the waste drawer and refilling the litter, press the RESET button to zero the Loo Count and Kitty Weight displays.
Components: The device consists of a Rotating Drum, Sifter, Silicon Litter Bladder, Weight Sensors, Removable Top Cover, Display Panel, Control Panel, Non-removable Machine Base, Top Cover Buckle, Waste Litter Drawer, Power Connector, and Night Light Cover.