Converter with SC and RJ-45 Connectors
Converter with ST and RJ-45 Connectors
3 INSTALLATION
To install your Converter, please see the following procedures:
• Location
• Switch Settings
• NWay settings
• Link Fault Signaling
• Loopback Test
• Install the Converter
Location
The location selected to install the Converter may greatly affect its
performance. When selecting a site, we recommend considering the
following rules:
• Install the Converter in a fairly cool and dry place. See Technical
Specifications for the acceptable temperature and humidity
operating ranges.
• Install the Converter in a location free from strong
electromagnetic field generators (such as motors), vibration,
dust, and direct exposure to sunlight.
• Leave at least 10cm of space at the front and rear of the unit
for ventilation.
• Affix the provided rubber pads to the bottom of the Converter to
protect the case from scratching.
English
English
5 6
!
To Next Page
Loading...
