SMC Networks SMC6750L2 User Manual

C OMMAND L INE I NTERFACE
3-84
bridge spanning-tree
Use this command to enable STA globally for the switch. Use the no form
to disable it.
Syntax
bridge bridge-group spanning-tree
no bridge bridge-group spanning-tree
bridge-group - Bridge group index (bridge 1).
Default Setting
Spanning tree is enabled.
Command Mode
Global Configuration
Command Usage
The Spanning Tree Algorithm (STA) can be used to detect and disable
network loops, and to provide backup links between switches, bridges
or routers. This allows the switch to interact with other bridging
devices (that is, an STA-compliant switch, bridge or router) in your
network to ensure that only one route exists between any two stations
on the network, and provide backup links which automatically take over
when a primary link goes down.
Example
The following example shows how to enable the Spanning Tree Algorithm
for the switch:
Console(config)#bridge 1 spanning-tree
Console(config)#

SMC Networks SMC6750L2 Specifications

General

Brand	SMC Networks
Model	SMC6750L2
Category	Switch
Language	English