Instructions for the user
84
11.3 Smontaggio delle guarnizioni
To permit thorough cleaning of the oven, the oven and door seals may be
removed. The operations described below must be carried out once the door is
removed.
11.3.1 Oven seal
The oven seal is fastened on three sides.
Pull the edges of the seal outwards to
detach the fasteners.
11.3.2 Door seal
To remove the door seal, first take out the
internal glass panel as indicated in
paragraph “11.4 Removing the internal
glass panels”. Then remove the seal
fasteners from the door.
11.4 Removing the internal glass panels
The glass in the oven door should always be kept thoroughly clean. For easier
cleaning, the door can be removed (see 11.2 Removing the door) and placed on
a canvas.
The glass panels of the door can be completely removed by following the
instructions provided below.
Warning: before removing the glass panels, make sure that at least one of the
door’s hinges has been locked in the open position as described in “11.2
Removing the door”. This operation may have to be repeated during the glass
removal process if the door is accidentally freed.
To Next Page
Loading...
