Installation
65
EN
Mounting under worktops (mm)
The oven is designed for mounting into any
piece of furniture as long as it is heat-
resistant. Respect the unit dimensions and
the oven overall dimensions for positioning.
Depending on the type of installation a slot
should be foreseen for ventilating the
appliance.
To be able to open the door
completely, any lower unit
protuberance should be at a
distance of at least 1 cm from the
oven.
When installed underneath a hob,
the panel must be at least 40 mm
thick. You should nevertheless refer
to the instructions in the hob
manual.
To Next Page
Loading...
