User instructions
17
The selection of options is controlled by the
relative buttons and indicated by the warning
light below the symbol. Please read the
paragraphs relating to each option for their
usage details.
Select this option together with any washing program (except the soak
program) to SHORTEN the cycle by from a minimum of 10% to a
maximum of 55%, depending on the cycle selected. To activate this
option, press the QUICK OPTION button (light comes on) after
selecting the program required. The option is automatically deactivated
at the end of the program.
This option allows the further reduction of energy consumption, thanks
to the assisted drying when the door opens at the end of the cycle. At
the end of the wash, a device automatically releases the door, which
slowly opens a few centimeters. This allows the best drying possible,
even at low rinse temperature, permitting an important energy saving.
When the door is completely open, a brief sound signal indicates that the
wash cycle has ended.
Enersave is automatically activated in all programs that include a final
drying phase (see program table). It is possible to disable it before
starting the program.
If this function is active, never prevent the door from opening by any
means, clear the space necessary to allow the opening of the door. Do
not force the closure of the door before the end of cycle signal,
because this would damage the mechanism.
To Next Page
Loading...
Need help?
General
