EasyManua.ls Logo

Smeg FC183PXNE - Page 34

Smeg FC183PXNE
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
32
If your fridge is not operating;
Is there a power failure?
Is the plug connected to the socket correctly?
Is the fuse of the socket to which the plug is connected or the main
fuse blown?
Is there any failure at the socket? To check this, plug your refrigerator
to a socket this is surely operating.
If your fridge is not cooling enough;
Is the temperature adjustment right?
Is the door of your fridge opened frequently and left open for a long
while?
Is the door of fridge closed properly?
Did you put a dish or food on your fridge so that it contacts the rear
wall of your fridge so as to prevent the air circulation?
Is your fridge lled excessively?
Is there adequate distance between your fridge and the rear and side
walls?
Is the ambient temperature within the range of values specied in the
operating manual?
If the food in your refrigerator compartment is over cooled
Is the temperature adjustment right?
Are there many food recently put inside the freezer compartment?
If so, your fridge may over cool the food inside the refrigerator
compartment as it will operate longer to cool these food.
If your fridge is operating too loudly;
To maintain the set cooling level, compressor may be activated from
time to time. Noises from your fridge at this time are normal and due to
its function. When the required cooling level is reached, noises will be
decreased automatically. If the noises persist;
“--”
"Low voltage
Warning"
When the power
supply gets lower
than 170 V the
appliance gets to
steady position.
This is not a failure. This
prevents any damages
on the compressor. This
warning will off after the
voltage gets required level
BEFORE CALLING YOUR AFTER SALES SERVICE

Related product manuals