Use
31
ITEN
Ending a preset program
1. When the preset program has finished,
the appliance will warn the user with
buzzers and the flashing symbol.
2. Press the control knob to perform
cooking with the same parameters
currently set (press the knob twice if the
buzzer is active). The appliance will
automatically restart cooking if it is at the
correct temperature; otherwise it will also
resume preheating.
3. Press the return knob to exit and end the
preset program.
Changing a preset program permanently
1. Inside the selected preset program, turn
the control knob to the left or right to
select change from the menu of the
selected dish. Then press it to confirm.
2. Turn the control knob to the right or left to
select the function to associate with the
preset program. Press the control knob to
confirm.
3. Turn the control knob to the right or left to
select the weight to associate with the
preset program. Press the control knob to
confirm.
Cooking in sequence is useful to
cook multiple dishes of the same
type. For example, it can be used
to cook several pizzas in a row.
It is not recommended to place the
dish in the oven during the
automatic pre-heat stage. Wait for
the specific message.
To Next Page
Loading...
