96 - CLEANING AND MAINTENANCE 91477A627/C
indicator light flashes.
Reservoir filling
1. Mix 100 g of citric acid with 650 ml of
water in a jug.
2. Open the door and pull the loading drawer
out of its housing.
3. Insert the funnel provided in the loading
drawer.
4. Pour in the descaling solution until the max.
level indicator light comes on.
5. At the end, remove the funnel and place the
loading drawer back in its place.
Boiler descaling function
1. Close the door
2. Press the button to start the function.
3. Descaling starts. The heating elements are
activated for the first 10 minutes of the
process.
From now on, it will no longer be
possible to cancel the descaling
process.
Do not use lactic acid or other
descaling agents.
If there is too much water in the
reservoir, the excess water will drain
into the oven cavity. In this case dry with
a cloth or sponge before proceeding.
To Next Page
Loading...
