Need help?Do you have a question about the Smiths Medical Level 1 NORMOFLO H-1129 and is the answer not in the manual?
General| Manufacturer | Smiths Medical |
|---|---|
| Model | H-1129 |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Warranty | 1 year |
| Product Name | Level 1 NORMOFLO H-1129 |
| Type | Fluid Warmer |
| Temperature Range | 37°C to 41°C |
| Material | Plastic |
| Color | White |
| Intended Use | Warming fluids |
| Design | Portable, compact |
Explains conventions and symbols used throughout the manual for clarity and consistency.
Details the function of the Gas Vent in the warming sets, releasing micro-bubbles from fluids.
Describes the recirculating solution heating system and its temperature control.
Explains the electronically operated pole that lifts fluid bags with a touch of a switch.
Lists the disposable sets available for use with the irrigation fluid warmer.
Covers essential safety information for the safe use of the Fluid Warmer, including electrical and environmental hazards.
Provides further critical warnings regarding device usage, accessories, grounding, and operational hazards.
Outlines cautions to prevent physical injury or adverse effects on the device or its performance.
Instructions for verifying all components are present before assembly.
Detailed steps for assembling the main unit to its base.
Guidance on installing the pressure chambers onto the device.
Procedure for attaching the fluid bag hanger to the device pole.
Instructions for setting up the 3-liter pressure accessory.
Procedure for disinfecting the internal reservoir before initial use.
Final preparation steps before operating the fluid warmer.
Instructions for conducting essential electrical safety tests.
Explains the process of warming fluids using a recirculating solution and heat exchanger.
Describes how the warmer uses pressure chambers for fast fluid delivery.
Details the LCD display and LEDs providing information on temperature and operating modes.
Describes the buttons for controlling power and testing alarms on the device.
Explains the window for checking the recirculating solution level in the reservoir.
Covers the toggle switch and pressure gauge for managing pressure chambers.
Details the pressure dial gauge and regulator knob for pressure adjustments.
Explains interlocks that detect correct installation of disposable sets.
Describes how to turn off the fluid warmer and its associated power states.
Explains the automatic mode activated when a disposable set is installed and the unit is ON.
Details how to test the visual and audible alarm indicators of the fluid warmer.
Explains how to test the operation of the fluid warmer's over temperature circuitry.
Indicates a missing or improperly installed disposable set, stopping circulation.
Signifies a low recirculating solution level, stopping circulation and warming.
Activates when reservoir solution exceeds 43.9°C, stopping warming and signaling an alarm.
Describes how pressure chambers deliver fluids at increased flow rates.
Explains how to disable pressurization by moving the toggle switch to the unpressurized position.
Details the pressure regulator knob and dial gauge for adjusting and displaying chamber pressure.
Provides crucial warnings regarding device usage, accessories, grounding, and operational hazards.
Outlines cautions to prevent physical injury or adverse effects on the device or its performance.
Covers setup procedures, including warnings for disposable set installation and usage.
Step-by-step guide for installing the disposable irrigation warming set onto the fluid warmer.
Instructions for priming the disposable sets, including warnings and specific set usage.
Procedure for connecting disposable hand pieces or specialized irrigation disposables using a standard spike connector.
Procedure for testing the visual and audible alarm signals of the fluid warmer.
Details on pressurizing chambers, preparing accessories, and adjusting the automatic pole.
Steps for safely changing the fluid bag while maintaining pressure and operation.
Procedures for shutdown, cleaning, and disposal after using the fluid warmer.
Provides a guide to identify and resolve common problems with the fluid warmer.
Offers solutions for issues related to slow or impeded fluid flow during operation.
Procedure to test the low recirculating solution alarm and its activation.
Tests interlocks that detect proper installation of the disposable set components.
Tests the fluid warmer's over temperature circuitry and alarm activation.
Confirms the proper operation of all visual and audible alarm indicators.
Evaluates operational performance, including cold start, calibration, and specific tests.
Procedures for testing earth leakage and ground continuity according to safety standards.
Cleaning and inspection tasks to be performed after each use of the fluid warmer.
Tasks scheduled for every 30 days, including lubricating O-rings and changing solution.
Annual maintenance tasks, including disinfecting the reservoir and replacing O-rings.
Instructions for replacing O-rings in the #1 and #2 blocks.
Procedure for cleaning the fan filter located on the bottom of the fluid warmer.
Provides a checklist for scheduled maintenance and calibration tasks.
Specifies who is covered by the warranty, excluding subsequent purchasers.
Details the process for claiming warranty service, including obtaining authorization.
Outlines conditions that will void the warranty, such as misuse or unauthorized repair.
Lists limitations on the manufacturer's liability and excludes implied warranties.
Emphasizes that only authorized personnel should perform service on the device.
Describes the process for obtaining free repair for units under warranty.
Explains procedures for repair of units that are out of warranty or damaged.
Lists documentation available upon request from Smiths Medical.
Provides guidance on proper disposal of the device, considering hazardous materials.
Lists contact information for Smiths Medical technical service and distributors.
Details product safety, EMC, enclosure protection, physical dimensions, environmental, and electrical specifications.
Provides recommended separation distances for RF communications equipment to prevent interference.
Lists the available disposable irrigation warming sets with their product descriptions.
Lists available accessories for disposable irrigation sets.
To Next Page
