EasyManua.ls Logo

Smiths Medical SurgiVet Advisor WWV9230 User Manual

Smiths Medical SurgiVet Advisor WWV9230
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Veterinary 3 Parameter
Advisor® Vital Signs Monitor
WW V9230 Operation Manual
- English
Catalog Number V1886R3
Version 0, February 2009
©
2009 Smiths Medical family of companies. All rights reserved.
NIBP
PRINT
ALARM
SILENCE
ZERO IBP
BATT
ON
OFF
AC
Patient ID
TRENDSALARMS
SETUP QUICKSET SUSPEND
NIBP MODE
MANUAL
FREEZE

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Smiths Medical SurgiVet Advisor WWV9230 and is the answer not in the manual?

Smiths Medical SurgiVet Advisor WWV9230 Specifications

General IconGeneral
BrandSmiths Medical
ModelSurgiVet Advisor WWV9230
CategoryPet Care Product
LanguageEnglish

Summary

Warranty and Service Information

Warranty Terms

Details on limited warranty for product, sensors, leads, and cuffs.

Chapter 1: Introduction

General Safety Warnings

Essential warnings for safe operation of the vital signs monitor.

Chapter 2: Intended Use and General Information

Intended Use and Capabilities

Purpose of the monitor and its measurement capabilities (ECG, NIBP, SpO2).

Chapter 4: Setting up the Monitor

Monitor Setup Instructions

Unpacking, quick setup, and detailed setup procedures for the monitor.

Patient Type Selection

Procedure for selecting the correct patient type (Cat, Dog, Horse) for monitoring.

Parameter Options Configuration

Setting ECG processing, turning parameters on/off, and changing units.

Chapter 5: Monitoring the Patient

General Monitoring and Patient Attachment

Basic monitoring steps, attaching patients, and adjusting waveform settings.

Parameter Box and Alarm Limit Adjustment

Adjusting parameter box settings and setting high/low alarm limits.

Alarm Response and Management

Responding to alarms, disabling alarms, and using silence features.

Quickset Alarm Adjustments

Using the QUICKSET feature to rapidly adjust alarm limits.

Chapter 6: Alarms

Alarm Types and Critical Failures

Overview of parameter/system alarms and critical failure alarm.

Controlling Alarms and Volume

Methods to control alarms, change limits, adjust volume, and turn detection off.

Chapter 7: ECG

ECG Waveform Configuration

Setting up ECG waveforms: lead selection, size, speed, and cascading.

ECG Parameter Box Settings and Alarms

Adjusting ECG settings, heart rate source, beep tone volume, and alarms.

Chapter 8: Oximetry

SpO2 Alarms and Messages

Detailed information on SpO2 alarms, priorities, and specific messages.

Chapter 9: Non-invasive Blood Pressure

NIBP Mode and Configuration

Selecting NIBP modes, adjusting settings, inflation pressure, and beep volume.

Measuring Non-invasive Blood Pressure

Procedures for manual, auto, and STAT NIBP measurement modes.

Chapter 10: Operator’s Maintenance and Troubleshooting

Routine Maintenance Schedule

Recommended actions and intervals for maintaining the monitor and accessories.

Troubleshooting Common Issues

A chart to diagnose and resolve common problems with the monitor.

Chapter 12: Service Menu

Service Menu Access and Defaults

Accessing the service menu and setting default monitor configurations.

Alarm Configuration Settings

Configuring ECG filter, alarm silence, and alarm reset operations.

Appendix B: Alarm Limit Defaults