WWW.SMITTYBILT.COM
Installation Instructions
Scout Trailer Kit
Part#87400/87400-01
How to Register your Smittybilt SCOUT Trailer Kit
1. Finish assembly of your new Smittybilt SCOUT Trailer Kit.
See instruction manual.
2. Remove tent or awning, if necessary.
Remove or do not install a tent/awning on the SCOUT Trailer Kit prior to taking it to DMV.
3. Visit your local DMV.
4. Register/Title your SCOUT Trailer.
Your local DMV may require:
• Purchase invoice
• Cash register receipt or bill of sale showing the purchase and retail sales tax or use tax collection
by the retailer.
• MCO (Manufactures Certificate Of Origin) Some states this will act as your title or pink slip.
• Make sure your receipts cover the trailer kit, tires and wheels, trailer brake controller, and any
other parts that were to be used with the construction of the trailer. (Keep all receipts for your
records).
IMPORTANT:
These instructions are a general guideline. Regulations and requirements will vary by state or province.
Please consult your State/Province Department of Motor Vehicles for additional information or
guidance on licensing, registration, or titling.
If you believe that your vehicle has a defect, which could cause a crash or could cause injury or death,
you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition
to notifying Smittybilt.
50
To Next Page
Loading...