WWW.SMITTYBILT.COM
Installation Instructions
Scout Trailer Kit
Part#87400/87400-01
Wheel Recommendations:
• Wheels should have a center bore of at least 2.55“
• Wheels should have a maximum of 4.25” backspacing but will vary depending on tire and wheel
combination. Always check for adequate clearance between tire, trailer body and parking brake
cable. If running a 12.5” tire you will want around 4” backspace.
• Factory Wrangler JK wheels will not fit unless you use a lug centric wheel spacer that is at least
1.5”-2” thick. 2” recommended if larger/wider than stock tires are used, to allow clearance
between tire and brake line.
• Always use the correct lug nut for your particular wheels. Check with wheel manufacture for lug
nut recommendation.
Accessories: (Available separately)
• Prodigy P3 proportional brake controller Part#90195. This has been the best one we have tested
and has the most functions and lock out feature for the trailer brakes.
• Worthington Propane Tanks 4.25 and 11lb and holder. (9.1” diameter) BKT-2286 *
• Comp-air tank(S/B2747) and comp-air tank mount (S/B2749*)
• Smittybilt Overlander tent (S/B2783 std size, S/B2883 XL tent)
• Smittybilt Awning (S/B2784 6.5’x6.5’ or S/B2787 8.2’x6.5’)
• Smittybilt EPS Generator S/B2786
• Smittybilt Arctic Freezer/Fridge S/B2789
• Smittybilt Universal Gerry Can Holder S/B2798*
• Smittybilt Trail Bag S/B2826
• Smittybilt RUT Utility Tool S/B2728
• Smittybilt 54” Trail Jack S/B2722
• Smittybilt Ratchet Straps S/B18602
*Additional mounting holes may need to be drilled, additional hardware may need to be purchased from hardware store.
52
To Next Page
Loading...