EasyManua.ls Logo

Smoke Factory Tour Hazer II User Manual

Smoke Factory Tour Hazer II
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
0
See the Performance
Introduction Manual
Type: Tour Hazer II
Question and Answer IconNeed help?

Do you have a question about the Smoke Factory Tour Hazer II and is the answer not in the manual?

Smoke Factory Tour Hazer II Specifications

General IconGeneral
BrandSmoke Factory
ModelTour Hazer II
CategoryFog Machine
LanguageEnglish

Summary

Introduction

Safety Instructions

Danger of Burning

Details risks of burns from hot steam escaping the nozzle and hot droplets.

General Safety

Covers unattended operation, proximity to fire, visibility reduction, and fluid contact.

Device and Parts Identification

Commissioning

Selecting the location

Specifies requirements for a suitable operating location for the device.

Installing and Changing the Fluidbottle

Provides step-by-step instructions for fluid bottle replacement.

Fogfluid

Recommends using special SMOKE FACTORY fluid and warns against other liquids.

Power Connection of the Tour Hazer II

Details how to connect the device to a power supply and its initial display.

Operating Instructions

Controls of the Tour Hazer II

Overview of the device's control panel, LEDs, and buttons.

Turning the device off

Instructions on how to safely shut down the device.

Control System

Information on controlling the device via external sources or DMX.

Adjusting the DMX start address

Guide on setting the DMX start address for external control.

Adjusting the values for the pump and the fan

Instructions on adjusting pump and fan performance from 1% to 99%.

Standalone mode

Details on operating the device without external control.

"Timer" Haze-Density Control System (HDCS)

Explains the user-definable profiles for haze density and timing.

Maintenance

Trouble-Shooting

Technical Specifications

Warranty Conditions

Service

Related product manuals