INPUTS
USB
BLUETOOTH
OPTICAL
COAXIAL
HDMI(ARC)
Instructions
DPLL
DPLL 1-9, the smaller the number, the better the performance against clock jitter.
This DPLL setting is a special function of ESS series products. It can adjust the bandwidth of the DPLL digital
phase-locked loop circuit inside the chip, so that the chip achieves a balance between anti-clock jitter and input
tolerance.
1. It is possible to connect all USB devices without a driver.
2. It can support the connection of various game consoles, such as PS4,PS5,Nintendo Switch etc.
3. USB 1.1 only supports a maximum of 96kHz.
When the clock stability of the input signal is good, this value can be reduced, so that the clock performance
of the system is better;
When the clock stability of the input signal is not good, the sound may be interrupted. Increasing this value
can avoid sound interruption! Especially when using TV as a signal source!
Its function:
USB
USB2.0 (select USB2.0, WIN system needs to install driver, support DSD)
USB1.1
To Next Page
Loading...
