NORMAL MODE
NORMAL mode, only use the digital receiver chip (DIR) to process the SPDIF signal,
used in most occasions, in this mode supports MQA renderer and DoP playback,
but at this time due to the limitation of the ES9068AS chip, it cannot display that the
current playing is DoP, and only 176.4kHz input can be displayed. This is normal,
and the internal will still decode DoP and output normal audio.
PROCESSOR MODE
PROCESSOR mode, in this mode SU-8s will use the XMOS processor to process the
optical/coaxial signal, so that it can have more powerful computing power and can
handle various complex tasks including MQA, DoP, in this mode , Play DoP audio,
the DSD icon will be displayed correctly on the display.
Note: do not switch this mode frequently, try to restart the machine after switching this
mode, otherwise it may cause output noise.
SPDIF MODE
Minimum Phase
Fast Linear
Slow minimum
This setting is only valid for optical/coaxial interfaces which using SPDIF protocol;
To Next Page
