SMSL VMV D1se - DSD FILTER; SOUND COLOR; PRE MODE

27
SOUND COLOR
Standard
Rich 1
Rich 2
Rich 3
Tude 1
Tude 2
Tude 3
Crystal 1
Crystal 2
Crystal 3
PRE MODE
VOL VARIABLE
VOL FIXED
Turn down AMP VOL!
DSD FILTER
47k Cutoff
50k Cutoff
60k Cutoff
70k Cutoff
There are 4 kinds of digital filtering in total.
It's the way that the digital operation means
the clutter outside the audioFilter out,
respectively
1. 47kHz Cutoff
2. 50kHz Cutoff
3. 60kHz Cutoff
4. 70kHz Cutoff
DSD FILTER
There are 9 sound color settings in D1se.
Rich1、 Rich2、 Rich3
Tube1、 Tube2、 Tube3
Crystal1、 Crystal2、 Crystal3
This setting is usingthe DSP of ES9038PRO,to
make some different sound color, all of these
settings will not change the frequency response
curve.When set to "Standard", this setting will be
bypassed.
SOUND COLOR
Volume control enable or disable.
Vol Fixed : In this mode, volume is fixed on
max output level, and the D1se will ignore
the volume operations.
Vol Variable: In this mode, volume can be
adjust by remote controller, and make
D1se a pre-amplifier.
PRE MODE