Snap-On SSX18P132 - Safety Precautions and Warnings; Fire and Electric Shock Hazards; Battery and Charger Safety; General Cautions

FIRE AND ELECTRIC SHOCK HAZARD
BATTERY/CHARGER HAZARD
CAUTION
CONNECTING TO THE PAIR OF WIRELESS SPEAKERS
CONNECTING TO A SINGLE WIRELESS SPEAKER
OTHER OPERATING INSTRUCTIONS
Please read and follow these safety warnings and cauons before using your Portable Bluetooth
Speaker/Device Charger to ensure your personal safety and to prevent property damage.
®
• Do not expose your Portable Bluetooth Speaker/Device Charger to liquid, moisture, humidity or rain.
• Do not use the Portable Bluetooth Speaker/Device Charger near a bathtub, sink, sauna, pool or steam
room. Exposure to moisture could result in electric shock.
• Do not drop, disassemble, open, crush, bend, deform, puncture, microwave, incinerate, paint or insert
foreign objects into the Portable Bluetooth Speaker/Device Charger. Such acons could result in electric
shock.
• Clean the Portable Bluetooth Speaker/Device Charger only with a dry cloth.
• Do not expose your Portable Bluetooth Speaker/Device Charger to extremely high or low temperatures.
• Do not leave your Portable Bluetooth Speaker/Device Charger in direct sunlight for extended periods of me.
• Do not leave your Portable Bluetooth Speaker/Device Charger near open flames such as cooking burners,
candles or fireplaces.
• Do not block any venlaon openings.
• Do not dispose of your Portable Bluetooth Speaker/Device Charger in a fire. The baery could explode
causing injury or death.
• Only charge the baery in accordance with the user instrucons supplied with the Portable Bluetooth
Speaker/Device Charger.
• Do not aempt to disassemble the Portable Bluetooth Speaker/Device Charger or force open the built-in
baery. This may result in electric shock.
• Do not charge the Portable Bluetooth Speaker/Device Charger in damp areas or in extremely high or low
temperatures. This could result in electric shock.
• Do not clean the Portable Bluetooth Speaker/Device Charger when it is being charged. Always unplug the
charger first before cleaning the Portable Bluetooth Speaker/Device Charger Automobile Accident Hazard.
• Do not aempt to replace your Portable Bluetooth Speaker/Device Charger baery, it is built-in and is
not changeable.
• Use only the manufacturer supplied charger to charge your Portable Bluetooth Speaker/Device Charger.
Other chargers may look similar but using them may result in electric shock or damage the unit.
• Observe all signs and displays that forbid any electrical device or RF radio use in designated areas.
2.Turn on the Bluetooth of your cell phone to find the connecon named “SSX18P132 BT
Socket Speaker” and connect to the speaker. The speaker will say “speakers pairing
successfully”, then you can play your music.
3.BUTTON “-”: Press on either speaker to decrease the volume. Press and hold for 2-3
seconds on either speaker to skip to the previous song.
5.BUTTON “M”: When two speakers are paired, press one of the speaker’s “M” buon to exit
speaker pairing mode and enter single speaker mode. Your cell phone will find the connecon
named “SSX18P132 BT Socket Speaker” and connect to only one of the speakers.
6.When two speakers are not paired, press the “M” buon on both speakers to enter twin speaker
pairing mode. The LED will alternavely flash red and blue. The speakers will be paired in 20
seconds and will say “speaker pairing successfully”.
9.If the speaker is not connected to any devices, it will go into standby mode aer 10 minutes to save
baery life. You will need to switch off and on again if you want to use it.
7.SWITCH SPEAKER TO “OFF”: When turning the speakers off, remember to turn off both.
8.CHARGING: Use the USB charging cable to charge the speakers, the LED light will turn from blue to red
while charging. When it is fully charged the LED light will turn off.
1.VOLUME CONTROL KNOB: Turn the knob on either speaker in a clockwise direcon to increase
the volume.Turn the knob in a counterclockwise direcon to decrease the volume.
NOTE: Your device’s (phone, mp3 player, etc.) Bluetooth needs to be turned off the first me you pair
your speakers together inially. If you do not have Bluetooth off, it may inially connect to only one
speaker. Follow these direcons carefully to connect to the pair of speakers.
NOTE: Speakers must be fully charged prior to first use. (Indicang light will be solid RED while
charging and will go off when fully charged).
2.BUTTON “+”: Press on either speaker to increase the volume. Press and hold for 2-3 seconds on
either speaker to skip to the next song.
4.BUTTON FOR “PAUSE OR PLAY”: Press on either speaker to pause or play.
1.Switch the speaker to “on”, the speaker will say “Power on.”
2.Push the “M” (MODE) buon on the boom of each
speaker one following the other. Both speakers will say
“Pairing” and the blue and red lights will flash. The two
speakers will automacally search for each other for
pairing. Aer pairing successfully, the speaker will
say “speaker pairing successful.” and one speaker will
say “Le Channel” (this is the main speaker), the another
will say “Right Channel” (this is secondary speaker).
3.Turn on the Bluetooth feature of your cell phone (or device) and find the connecon named
“SSX18P132 BT Socket Speaker.” Aer connecng with the twin speakers, it will say “Bluetooth
connected”, then you can play music wirelessly.
1.Switch both speakers to “on”, the speakers will say
“Power on.”
• Dispose of your Portable Bluetooth Speaker/Device Charger in accordance with local regulaons. Do not
dispose of baery with regular household waste.
• Do not use your Portable Bluetooth Speaker/Device Charger on any aircra.
• Do not use abrasive cleaners on your Portable Bluetooth Speaker/Device Charger, as this will cause damage.
• Do not insert anything into your Portable Bluetooth Speaker/Device Charger unless otherwise specified in
the user instrucons. This could result in damaging the internal components.
• Do not aempt to repair, replace, modify or disassemble your Portable Bluetooth Speaker/Device Charger
yourself, it does not contain any user-serviceable components
.
• Do not leave or store the Portable Bluetooth Speaker/Device Charger or any of its accessories near or over
your automobile’s airbag because serious injury may result when an airbag deploys.