28
5 6
1
2
4
3
7
8
4-15
Layout
4.4 Key pad
Fig. 4-15 Key pad
1 Menu keys (associated with a menu fi eld)
2 ESC key
3 HELP key
4 START key
5 STOP key (emergency stop)
6 Key to decrease
7 OK key (to confi rm)
8 Key to increase
Description of keys
1 Menu keys
–
Ca
rry out or continue certain functions or steps of
operation.
The meaning of the menu keys is shown by associated
pictographs (symbols) on the screen.
2 ESC key
– Switch back to the previous screen (status).
– Exits the C codes procedures
– Deletes the help information and error messages.
3 HELP key
– Display useful information to explain a situation and – in
case of error codes – provide hints for remedy.
4 START key
– Start the measuring run.
Press to start balancer cycle, with the wheel guard down.
5 STOP key (Emergency Stop)
– Stop a measuring run that has just been initiated and
brake the wheel.
Note:
The STOP key also has an emergency stop function.
6 - key
To
decrease an input value (e.g. rim diameter,
offset, rim width).
Hold down the key to reduce the values shown
automatically.
7 OK key
– Inserts the Menu options selected previously.
8 + key
To increase an input value (e.g. rim diameter, offset,
rim width).
Hold the key down to increase the values shown
automatically.
To Next Page
Loading...
