Snapper COMMERCIAL WALK-BEHIND - Page 37

37
DEBRIS BLOWER (page 2 of 6)
ITEM PART NO. DESCRIPTION
-- 6-3006 KIT, Debris Blower (Incl. items 1 thru 15)
1 662643* HOUSING
2 656069* BELT, SP Models with Kohler Engine
- 663099* BELT, PL7H Models
- 663099* BELT, Models without Kohler Engine
3 662648* STAND, Parking (2)
4 663601* SNAP BUTTON (2)
5 (see pg. 40) ASSEMBLY, Idler
6 656589* FLANGE, Bearing (2)
7 654532* BEARING with Locking Collar
8 655379* KEY, 1/4” Square x 1” long
9 662806* SHAFT
10 662956* BEARING
11 662713* BOX, Reduction
12 663851* PULLEY, MB50
13 662710* COVER, Belt
14 660924* KEY, 1/4” Square x 2-1/2” long
15 662926* COVER PIN, 1/4” Dia. x 1/2” long (2)
16 -- PIN, 3/16” Dia. x 2” Cotter (3)
17 -- BOLT, 3/8-16 x 1-1/4” Hex (4)
18 -- WASHER, 3/8” Lock (2)
19 9-1595 WASHER, 7/16” Flat (13)
20 -- BOLT, 3/8-16 x 8-1/2” Hex Head (2)
21 9-0130 NUT, 3/8-16 Hex
22 9-0208 BOLT, 5/16-18 x 1” Square Neck Carriage (5)
23 -- WASHER, 5/16” Lock (7)
24 9-0196 NUT, 5/16-18 Hex, Grade 5 or B (7)
25 9-0449 NUT, 7/16-14 (4)
26 -- WASHER, 7/16” Lock (4)
27 -- BOLT, 7/16-14 x 1-1/4” Hex (4)
28 9-0585 NUT, 5/16-18 Hex Flange Lock, Grade 5 or B (14)
29 -- HAIR PIN, 2,5mm x 40mm (2)
NOTE: Items 16 thru 29, shown on the previous page, are not part of this kit.
*RAD Technologies, Inc. part number (other numbers are Snapper)
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES