EasyManua.ls Logo

Snapper COMMERCIAL WALK-BEHIND - Page 47

Snapper COMMERCIAL WALK-BEHIND
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
47” ROTARY BROOM (page 6 of 6)
ITEM PART NO. DESCRIPTION
-- 6-3007 KIT, 47” Rotary Broom (continued) (Incl. items 71 thru 99)
71 657876* PULLEY, Idler
72 663870* LEVER
73 663872* SUPPORT, Lever
74 663871* BUSHING
75 663867* SPRING, Torsion
76 661976* WASHER, 13/32” Dia. Hole
77 663915* CASING (2 halves)
78 661739* PLUG, 3/8”
79 661144* O-RING
80 661730* OIL SEAL (2)
81 661728* BEARING (2)
82 661734* SNAP RING (3)
83 661738* GEAR, Z25 M3,5
84 660063* PARALLEL KEY, A8 x 7 x 25
85 661729* SHAFT
86 661737* SHIM 25.6 x 0.8
87 661736* SHIM 25.6 x 1.0
88 661731* SHIM 25.6 x 0.7
89 661735* PINION 29 M3.5
90 661732* BEARING
91 661733* SHIM 25.6 x 0.6
92 663909* BREATHER
93 663855* PLUG, Oil Level
94 663916* BEARING
95 663534* SUPPORT (2)
96 663535* BRACKET, Right Hand Wheel
-- 663536* BRACKET, Left Hand Wheel (not shown)
97 658578* NYLON WASHER, 0.630” I. D. (2)
98 654106* GREASE FITTING, 1/4” NF (2)
99 661306* WHEEL, 6” Dia. x 2” (2)
100 9-0598 WASHER, 5/16” Flat
101 9-0730 BOLT, 3/8-16 x 1-3/4” Hex
102 -- BOLT, M8 x 45 (8)
103 -- NUT, M8 Hex (8)
104 -- WASHER, 11/16” Flat (8)
105 9-0753 PIN, 3/16 x 1-1/2” Cotter (2)
106 -- PIN, 1/4 x 1-1/2” Cotter (2)
NOTE: Items 100 thru 106, shown on the previous page, are not part of this kit.
*RAD Technologies, Inc. part number (other numbers are Snapper)
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES

Related product manuals