Snapper COMMERCIAL WALK-BEHIND - Page 51

51
40” TWO STAGE SNOWBLOWER (page 4 of 8)
ITEM PART NO. DESCRIPTION
-- 6-3004 KIT, 40” Two Stage Snowblower (continued) (Incl. items 35 thru 45)
35 662889* HITCH, Female Quick
36 662926* PIN, 1/4” Dia. x 1/2” (2)
37 663960* GUARD, Belt
38 661832* KNOB, 5/16-18
39 657319* ASSEMBLY, Chute, Base Knobs & Decal
40 657309* KNOB, 5/16-18 (2)
41 658467* WASHER, 11/32” Flat (nylon) (2)
42 658468* WASHER, 7/16” Flat (nylon) (2)
43 657308* HAND GUARD
44 657338* RING, Nylon
45 657333* PLATE, Retaining (4)
46 9-1304 BOLT, 3/8-16 x 1” Hex, Grade 5 (2)
47 9-0646 BOLT, 1/2-13 x 1” Hex, Grade 5 (2)
48 -- HAIR PIN, 2mm x 41mm (2)
49 -- WASHER, 1/2” Lock (2)
50 9-0258 NUT, 1/2-13 Hex (2)
51 -- WASHER, 3/8” Lock (2)
52 9-0577 BOLT, 5/16-18 x 1-1/2” Square Neck Carriage (2)
53 -- BOLT, 1/4-20 x 3/4” Hex (4)
54 9-0598 WASHER, 5/16” Flat (2)
55 -- WASHER, 1/4” Lock (2)
56 9-0063 NUT, 1/4-20 Hex, Grade 5 or B (2)
57 -- BOLT, 1/4-20 x 1/2” Hex (6)
NOTE: Items 46 thru 57, shown on the previous page, are not part of this kit.
*RAD Technologies, Inc. part number (other numbers are Snapper)
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES