Snapper COMMERCIAL WALK-BEHIND - Page 53

53
40” TWO STAGE SNOWBLOWER (page 6 of 8)
ITEM PART NO. DESCRIPTION
-- 6-3004 KIT, 40” Two Stage Snowblower (continued) (Incl. items 58 thru 75)
58 657335* BUSHING, 1-5/16” long (plastic)
59 657331* WORM, Rotation
60 657336* BUSHING, 1-11/16” long (plastic)
61 657329* SUPPORT, Rotation Worm
62 664006* TUBE, Handle
63 663600* BUTTON, Snap
64 664007* HANDLE, Rotation
65 656797* GRIP, Handle
66 663964* SUPPORT, Rotation Handle
67 657390* GROMMET
68 663973* TUBE, Extension (for models with Briggs Vanguard engine)
69 663974* BRACKET, Support (for models with Briggs Vanguard engine)
70 662880* REDUCTION BOX
71 663054* GUIDE, Pulley (2)
72 657251* ASSEMBLY, Sprocket with Shaft
73 656589* FLANGE, Bearing (4)
74 657294* BEARING w/Set Screws (2)
75 663247* CHAIN
76 -- BOLT, 3/8-16 x 1-1/4” Square Neck Carriage (2)
77 9-0605 BOLT, 5/16-18 x 5/8” Square Neck Carriage, Grade 5 (4)
78 -- WASHER, 5/16” Lock (6)
79 9-0196 NUT, 5/16-18 Hex, Grade 5 or B (8)
80 9-0208 BOLT, 5/16-18 x 1” Square Neck Carriage (2)
81 9-0390 WASHER, 3/8” Internal Tooth Lock (4)
NOTE: Items 76 thru 81, shown on the previous page, are not part of this kit.
*RAD Technologies, Inc. part number (other numbers are Snapper)
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES