Snapper COMMERCIAL WALK-BEHIND - REVERSE THROTTLE INTERLOCK KIT; TAPERLOCK PULLEY KIT

63
REVERSE THROTTLE INTERLOCK
ITEM PART NO. DESCRIPTION
-- 6-1783 KIT, Reverse Throttle Interlock (Includes items 1 thru 9)
1 1-5707 SWITCH, Detent NO
2 3-4466 BRACKET, Reverse Switch
3 2-7225 SWITCH, Single Pole
4 3-4459 BRACKET, Reverse Throttle
5 2-8516 HARNESS, Reverse Throttle Wire
6 9-1603 NUT, 1/4-20 Hex Nyloc (2)
7 9-1495 SCREW, 1/4-20 x 3/4” Hex Head Cap, Grade 5 (2)
8 9-1290 NUT, #10-24 Hex Nyloc (2)
9 9-1631 SCREW, #10-24 x 1/2” Hex Head Cap (2)
TAPERLOCK PULLEY
ITEM PART NO. DESCRIPTION
-- 6-0899 KIT, Taperlock Pulley 48 (Includes items 1 & 2)
1 1-9101 PULLEY, Taperlock
2 2-3381 BUSHING, Taperlock
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES
NOTE: Kit 6-1783 will fit PRO 7 Series 1 & 2 Mowers. It is used to convert 1994
& earlier models to 1995 & later models.
NOTE: Kit 6-0899 will fit on PRO Mowers
with 48” decks to replace pulley
#7-6648. When used properly the
component pulley and bushing
securely attach to the spindle and
will not “float” up or down. on the
shaft.
2
3
9
8
5
4
7
6
1
2
1