Snapper COMMERCIAL WALK-BEHIND - SHIFT ARM EXTENSION KIT; DRIVEN DISC REPLACEMENT KIT

64
SHIFT ARM EXTENSION
ITEM PART NO. DESCRIPTION
-- 6-3136 KIT, Shift Arm Extension (Includes items 1 thru 3)
1 7-3059 PLATE, Extension (2)
2 9-0969 BOLT, 1/4-20 x 1/2” Flat Head Short Square Neck (2)
3 9-1099 NUT, 1/4-20 Hex Center Lock, Grade B (2)
DRIVEN DISC REPLACEMENT
ITEM PART NO. DESCRIPTION
-- 6-1077 KIT, Driven Disc Replacement (Includes items 1 thru 9)
1 1-7339 SHIFT LEVER, Lower
2 1-9049 COVER, Shaft
3 5-2337 HUB ASSEMBLY
4 1-7226 DRIVEN DISC
5 1-5163 KEY, 3/32 x 1/2” Woodruff (#304)
6 9-0692 WASHER, 5/16” Flat
7 1-1731 WASHER, 3/8” Belleville
8 9-0583 NUT, 1/4-20 Hex Flange Lock (4)
9 9-0524 NUT, 3/8-24 Hex, Grade C
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES
NOTE: Kit 6-3136 will fit electric start
PRO Hydro Series 0 mowers.
1
NOTE: This kit will fit models
Y30080, Y30120 & Y41120 Mid-
Duty Commercial Walk-Behind
mowers.
3
6
5
9
7
8
4
Chain Case (Reference)
2
1
Clamps (Reference)
Hex Shaft
(Reference)