-
-
INTENDED USE
-
INTRODUCTION
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all in-
structions.
Save all warnings and instructions for
future reference.
WORK AREA SAFETY
Keep work area clean and well lit.
Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
Keep children and bystanders
away while operating a power tool.
ELECTRICAL SAFETY
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
Do not expose power tools to rain
or wet conditions.
PERSONAL SAFETY
Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication.
Use personal protective equipment.
Always wear eye protection.
Prevent unintentional starting.
Ensure the switch is in the off
position before connecting to power
source and/or battery pack and
when picking up or carrying the tool.
Remove any adjusting key or wrench
before turning the power tool on.
Do not over-reach. Keep proper
footing and balance at all times.
To Next Page
Loading...